Dual 20700/21700 Nasy “GXL Ver.”

$105.00

Dimensions: 31mm X 58mm X 103mm

Powder Coated enclosure done in house!

3D printed battery sled with ribbon! by Modz By Nasy
**Fits both 20700 and 21700 batteries**

Varitube 510 Flush Mounted!

14ga oxygen free copper used for all load bearing wiring

Hidden door magnets

Series good down to 0.3ohm

Parallel good down to 0.2ohm

PWM good down to 0.3ohm

These ohm limits are based on 30amp batteries!!

30amp load MAX! – Parallel 60amp load MAX!

Powder coat color and texture may vary

All Mods have a 1-7 day build time due to them being hand made to order!

2 in stock

  • *Box Configuration

    See the About PWM page for information about PWM options.

     
    • 50 $

    *Switch Color

    Master on/off switch

    This will add an on/off switch to your mod. 

     
    • 10 $

    Full color Wrap

    • 0 $

    *Upload Wrap Image

    Custom Image for Full color wrap

    • (max file size 128 MB)

    *Powder Coat Color

    What color would you like your box powdercoated? Please see the Powder coat gallery for photos of swatches of each color offered. 

    *Top/Bottom color

    • $

    Door color different than box?

    *Door color

    Full color printing on door

    Add a full color image to the door of your mod.

     
    • 0 $

    *Upload Full Color image

    • (max file size 128 MB)

    Etching on Door

    • 10 $

    Please see the Etching guidelines, you'll be informed if your photo will not work.

    • (max file size 128 MB) $

    Etching on Side

    • 5 $

    *Upload Side Image

    Please see the Etching guidelines, you'll be informed if your photo will not work.

    • (max file size 128 MB) $

    Etching on Back

    • 10 $

    *Upload Back Etching Image

    Please see the Etching guidelines, you'll be informed if your photo will not work.

    • (max file size 128 MB) $

    *Expected Shipping Date on Mods

    I understand that box mods take 1-2 weeks to ship after the order is placed.

    ***ETCHING IS NOT FULL COLOR**

Category: Tags: , , , , , , , , ,

Description

Dimensions: 31mm X 58mm X 103mm

Powder Coated enclosure done in house!

3D printed battery sled with ribbon! by Modz By Nasy

Varitube 510 Flush Mounted!

14ga oxygen free copper used for all load bearing wiring

Hidden door magnets

Series good down to 0.3ohm

Parallel good down to 0.1ohm

PWM good down to 0.3ohm

These ohm limits are based on 30amp batteries!!

30amp load MAX! – Parallel 60amp load MAX!

Powder coat color and texture may vary

All Mods have a 1-7 day build time due to them being hand made to order!

Related products